Best selling diesel injection pump test stand
1. Motor power: 5.5, 7.5, 11, 15, 18.5, 22, 30kw
2. Power supply voltage: 415, 380, 220V
3. Frequency: 50/60 HZ
4. Protection level: IP54
5. Speed range: 0-4000 RPM
6. Counter setting range: 0-9999
7. Temperature setting range: 0-80 degree
8. Center height of driving shaft: 125mm
9. DC power: 12/24V
10. Diameter of the Driving coupling: 120mm
11. Measuring tube: 45ml, 150ml, 260ml(optional)
12. Number of measuring cylinder: 6, 8, 12
13. Oil supply pump: 10L/MIN
14. Oil supply pressure: High pressure: 0-40bar; low pressure:0-4bar
15. Oil tank volume: 60L
16. Pressure gauge: Low pressure: 0-6bar; high pressure:0-60bar; inner pressure: 0-16bar;
Positive and negative pressures: -1 - 2.5 bar; Lubricating oil meter: 0-10bar
17. Heat Power: 2kw
18. Temperature controlled range: 30-65 degree
19. External dimension: 2100mmx1060mmx1750 mm
20. Weight: 1100KGS
Oil lubrication system optional
Diesel tank and oil tank material stainless 304, iron optional
Rexroth frequency Inverter essure stable working and accurate result.
Testing pump 6 / 12 cylinders
Cabinet optional(working with high efficiency)
1. Measurement of each cylinder delivery at any speed.
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5...Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump. (12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device. (on request)
10. Checking the sealing of injection pump body
11. Install tube of auto-sucking oil supply can check on oil supply pump(including In line pump. )